A4/A3 Sheeting Machine
A4/A3 Sheeting Machine
RONALD A-4/A-3 SHEETING MACHINE IS A
STATE-OF-THE-ART MACHINE FOR
MANUFACTURING PRECISE SIZES OF
A-4/A-3 SHEETS AT HIGH SPEED.
The machine consists of the following features:
- Reel Stand with American Pneumatic Brake System.
- Web Aligner from Germany.
- De curling Unit
- Dancing Roller Mechanism
- American Pneumatic Cutter for Slitting.
- Robotic Arm for collecting the counted sheets and placing them on the conveyor.
Note: Automatic packing machine can also be connected in line with the machine.
Technical Details
| Equipped with size | A4 (210 x 297 mm) & A3(297
x 420 mm) | |
| Web Speed ** | 150 meters/
minute | |
| Unwinding Stand | Two Separate Reel Stands with Automatic Web Aligner | |
| Reel
Width | 890 mm Maximum | |
| 440 mm Minimum | ||
| Reel Diameter | 1200 mm | |
| Reel Weight | 800 Kg | |
| Core I.D. | 76 mm | |
| Material | Uncoated Copier Paper | |
| Paper (GSM) | 70 to 100 | |
| Reel Lifting | Automatic Floor pickup by pneumatic system | |
| Brake | Electro-pneumatic tension control | |
| Cutting System | Synchro
cutting system | |
| D-Curling System | Manual | |
| Number Of pockets | 4 | |
| Sheet Length
Accuracy | Approx ±0.5 mm | |
| Sheet Angle
Accuracy | Approx ±0.5 mm | |
| Cross-Cutting Knife Load (MAX.) | 200 GSM | |
| Slitting Knife Load (max) | 200 GSM | |
| Cross-cutting Knife Cutting Width (max.) | 860 mm | |
| Trimming | Minimum 2.5 mm on each side | |
| Power Specification | 415 V ± 10% ,
50 Hz , 3 Phase | |
| Connecting Load (Approx.) | 42 KW(Without A415 Vir COMPRESSORS) | |
| Recommended Floor Space (LXWXH) | 20X13X5.5 (meters) | |
| Manpower | Operator(Skilled) - 1, Helpers - 2 |
This section is here to help you find the answers for the most common questions about our products.
General Questions
The A-4
/ A-3 sheeting machine is designed to manufacture precise-sized A-4 (210 x 297
mm) and A-3 (297 x 420 mm) sheets at high speed. It is a state-of-the-art
machine that can handle uncoated copier paper with a GSM range of 70 to 100.
The A-4 / A-3 sheeting
machine comes equipped with a reel stand with an American pneumatic brake
system, a web aligner from Germany, a de-curling unit, a dancing roller
mechanism, an American pneumatic cutter for slitting, and a robotic arm for
collecting the counted sheets and placing them on the conveyor. It also has two
separate reel stands with automatic web aligners, and four pockets for storing
the sheets.
The A-4
/ A-3 sheeting machine has a web speed of 150 meters/minute, making it capable
of producing a large volume of sheets in a short amount of time.
The
recommended floor space for the A-4 / A-3 sheeting machine is 20x13x5.5 meters.
It is important to ensure that there is adequate space around the machine to
allow for safe operation and maintenance.
The A-4 / A-3 sheeting
machine is designed to handle uncoated copier paper with a GSM range of 70 to
100. It is important to use the correct type of paper with the machine to
ensure that it operates correctly and produces high-quality sheets.
The A-4 / A-3 sheeting
machine can handle reel widths ranging from a minimum of 440mm to a maximum of
890mm.
The A-4 / A-3 sheeting
machine has a sheet length accuracy of approximately ±0.5mm and a sheet angle
accuracy of approximately ±0.5mm. This is achieved through the use of a synchro
cutting system, which ensures that the sheets are cut at the correct length and
angle.
The A-4 / A-3 sheeting
machine uses an American pneumatic cutter for slitting and a synchro cutting
system for cross-cutting. The machine can handle a maximum cross cutting knife
load of 200 GSM and a maximum slitting knife load of 200 GSM. The cross cutting
knife cutting width is 860mm, and the trimming on each side is a minimum of
2.5mm.
The A-4 / A-3 sheeting
machine requires a power supply of 415 V ± 10%, 50 Hz, 3 Phase, and has a
connecting load of approximately 42 KW (without A415 Vir COMPRESSORS). It is
important to ensure that the power supply is stable and sufficient for the
machine's operation.
